Bina Grout System

 

PU FOAM INJECTION GROUT

 

 

 

 

 

DESCRIPTION

Grouting work is a process of injection chemical into leaking surfaced (concrete) which is combination of two component polyurethane system and purcat.


CHARACTERISTICS

  • Totally water resistant.
  • Solvent free
  • Some reaction with salty or contaminated water.
  • Excellent bonding strength.
  • Non-toxic in cured form.
  • Resistant to biological attack.

APPLICATION
  1. For sealing leakages and water seepages in tunnels, subways, pipes, reservoirs, manholes, concrete structures and slurry walls.
  2. For soils stabilization, tie-back anchors and underpinning of foundations.
  3. For sealing leakages through movement joints e.g expansion joints, tunnel segment joints.
  4. For sewer rehabilitation, manhole repairs and soil stabilization e.g protection of concrete pipes againts soil settlement.
OPERATION

Firstly it should be estimated how long it would take to get sufficient penetration, then the correct percentage of catalyst estimated from the chart below. Always under-estimate rather than over-estimate the quantity of catalyst required, as more can always be added during operation.

The premixed resin can be pumped by means of the Wagner (Finish 300) high pressure injection pump. Following the injection, the pump and attachments must be cleaned with xylene, toluene or thinner.

Technical Data Base Catalyst
Colour Brown Clear
Viscosity 100 20
Spesific Gravity 1.14 0.93
Flashpoint 200 C 150 C
Volatility Non Volatile Non Volatile
Comp. Strengh 6.0 N/mm *
* determined with a test sample made from a standard sand combined with chemical grout


TOXICITY

P.U GROUT is safe for use with portable water.


Dosage Gel Time Packing
0 % 30 min PU. GROUT:25kg steel drums
1 % 16 min PURCAT R1:0.9kg & 4.5kg
3 % 10 min containers
5 % 3 1/2 min
10 % 2 min

SAFETY INFORMATION

When handling the raw materials and their components, care should be taken to prevent the liquids from coming into contact skin and eyes. Avoid inhalation of their vapours. Detailed safety precautions, which should be observed during injection of chemical grouts, are given in our health and Safety Data Sheets.

 

Leaking Surface
 
Scope of Works
 
Range of Application

 

 

<< Back

   
 
 About Us | Site Map | Contact Us | Copyright © 2008 Binatech.biz . All Rights Reserved.