BINA INTEGRATED - Home Page

DESCRIPTION

BINASEAL 1000 is a formulated using a flexible synthetic resins disposed with other polymeric micro compound to penetrate into micro capillaries in concrete. It can also be used as a surface thin layer repair mortar for concrete honeycomb.

RECOMMENDED USE

Basements, R.C. gutters and roofs
Wall renderings
Tunnels
Floor slabs
Foundation wall precast panels
Toilets

ADVANTAGES

Economical
In-organics
Non-toxic
Hard wearing
Easy handling
Non-tainting
Unaffected by U.V.
Environmental friendly
Protect concrete from deteriorating, oxidation, efflorescence, corrosion and spalling.

APPLICATION METHOD

Clean the surface.
Mix part A to part B in container with power stirrer until homogeneous.
For primer coat, add the blend with 10-20% water.
Before it fully dry, apply 2 kg/m² of blend @ 2 coats. The application shall be done in a crisscross pattern between coats. Over coating is performed after each coat is dried for approx. 24 hrs.
Application is not possible below temperature of 5°C and on frozen surfaces.
The waterproofed are must be allowed to be cure for 36 hrs before backfilling or applying any foreign coatings.

TECHNICAL SPECIFICATIONS
No. of Components		Two
Mixing Ratio		1 part A (20kg): 1 part B (5kg)
Port Life (28°C)		60 mins
Drying Time (20°C) days	Initial	3 hours
	Final set	4 hours
Strength (STME-149)	2 days	Compressive - 9 N/mm² , Bending - 5 N/mm²
	28 days	Compressive - 52 N/mm² , Bending - 23 N/mm²
	28 days	121 psi on open structure concrete
		128 psi on closed structure concrete
		76 psi on steel formed concrete
		126 psi on clay brick
		118 psi on concrete brick
Tensile Strength (ASTM C-190)	28 days cured	334 psi at 100% R.H.
Tensile Strength (ASTM C-190)	28 days cured	117 psi at 50% R.H.
Flexural Strength (ASTM C-190)	7 days	470 psi
Permeability (ARMY C.E)	7 days	2.7 x 10^-8 cms^-1 (2 coats)
(CRD-C48-55)	7 days	1.9 x 10^-8 cms^-1 (3 coats)

COVERAGE

Ground moisture : 2.0 - 2.5 kg/m²

Water seepage with hydrostatic pressure : 2.5 - 3.0 kg/m²

Water seepage without hydrostatic pressure : 3.0 - 3.5 kg/m²

Next to Bina Flexseal 2000 >>